Thermo Scientific Delta-V Isotopic Ratio Mass Spectrometer
The heart of the “Fritz Ebner” Isotopic Laboratory is formed by the Delta-V IRMS. Equipped with a Flash Elemental Analyzer, a Carbonate Gas Bench, a Trace GC/IsoLink for fluid samples and a Trace GC/IsoLink for gas samples, this analyzer represents a unique and powerfull appliance for determination of the stable isotopes of Hydrogen, Carbon, Nitrogen and Oxygen in a broad variety of samples.
Thermo Scientific Delta-V Isotopic Ratio Mass Spectrometer
![irms](/fileadmin/_processed_/2/a/csm_irms_4a822ebb77.jpg)
Specifications
Detectors: Universal Triple Collector
MEMCO Collector
HD Collector
(e.g. Faraday Cups switchable between @ m/z 2, 3, 28, 29, 30, 31, 32, 33, 34, 36, 44, 45, 46, 47, 48, 64, 66)
Thermo Scientific Flash EA
![ea](/fileadmin/_processed_/c/4/csm_ea_d6771a8978.jpg)
Measurement of carbon and nitrogen bulk isotopic ratio of solids and liquid hydrocarbons
Finnigan Gas Bench II
![gb](/fileadmin/_processed_/c/7/csm_gb_5f2e629707.jpg)
Measurements of Carbon and Oxygen Isotopic ratios of carbonate minerals in bulk and dissolved inorganic carbon in water.
Thermo Scientific Trace GC/IsoLink
![gcil](/fileadmin/_processed_/a/1/csm_gcil_3373e19872.jpg)
Measurements of Carbon and Hydrogen Isotopic ratios of liquid hydrocarbons
Specification:
Installed Column: J&W Scientific DB-5MS fused silica, 30m*0.25mm, 0.25 micron
IsoLink Ovens: Combustion and HTC
Thermo Scientific TraceGC/IsoLink
![gcil_01](/fileadmin/_processed_/8/c/csm_gcil_01_4919b399f9.jpg)
Measurements of Carbon and Hydrogen Isotopic ratios of hydrocarbon gases, CO2 and H2
Specification:
Installed Column: J&W Scientific, 25m PoraPlot +
Part. Trap. 2.5m*0.32mm; 10 microns
Carrier Gas: Helium
IsoLink Ovens: Combustion and HTC
Minimum concentration: 800ppm per compound for Carbon Isotopy
2000ppm per compound for Hydrogen Isotopy